SO-333 concrete surface finisher

The concrete - finishing SO - 333 car was developed for smoothing down of concrete surfaces after use by their vibrolaths and deep vibrators by production of concrete and cement floors in civil, industrial and housing construction.

Artikul: so - 333

In more detail

The concrete - finishing SO - 333 car was developed for smoothing down of concrete surfaces after use by their vibrolaths and deep vibrators by production of concrete and cement floors in civil, industrial and housing construction. Are included in a design of the smoothing - down SO - 333 car: working body, drive, frame and handle.

The drive represents the motor reducer with the electric motor working in the 2 - speed mode, and working body, depending on works which it is necessary to execute, or the smoothing - down disk or blades. In the handle there passes the hummock mechanism by means of which it is transferred to the mechanism of an inclination of blades. all mechanisms of control of car it is taken out on the handle for convenience of its use.

Controls of the drive of the smoothing - down SO - 333 car consists of the manual pedal sharnirno established on the right handle and connected by means of a rope with the press lever it is transferred to the microswitch which when pressing a manual pedal closes a chain of control of the drive, carrying out launch of the electric motor. Blades are installed on axes by means of universal forelocks.
The universal smoothing - down SO - 333 car is completed with a disk with a diameter of 880 mm for preliminary steeling and smoothing down of concrete and cement floors and bladed working body with a diameter of 800 mm for achievement of final finishing of a floor with four metal smoothing - down blades located in one plane at an angle 90 ° (120 °) to each other. The smoothing - down SO - 333 car is connected to a three - phase network of 380 V, with a frequency of 50 Hz by means of a cable and plug sockets with system of automatic power off.